|
 |
GigMAC PMC, Model 5161
Online Documentation
Please see our Gigabit Ethernet Driver page
for more information on our drivers for this controller.
|
Benefits
- Highly efficient bus-master DMA engine design, 64-bit, 66 MHZ PCI
- Provides advanced CPU-offload features
- High performance, wire speed transmissions
- Ultra-low power transceiver consumes 1 watt
- Fully shielded recessed low-profile RJ-45
- Low cost, low power, highly integrated solution
- Small form factor PMC mezzanine card design
- Integrates easily into your target system
- VxWorks (5.4/5.5), Linux (2.4/2.6) and Windows (2000, XP) embedded driver support available
- Tornado 2.2 / VxWorks 5.5 support includes PowerPC and Intel pcPentium4 / Xeon BSP(s)
- Optional driver support for link aggregation, load balancing,
fail over and fall-back
- Ruggedized models available with extended temperature (-40C - +85C) and MIL-SPEC conformal coating (-R1, -R2)
|
Description
GigMAC PMC, Model 5161
DSS Network's GigMAC PMC Model 5161 is a high performance Gigabit Ethernet controller card for embedded applications in
broadband telecommunication and data communications networks. It provides a single port 1000 Base-T copper connection over
CAT5 cabling and is fully IEEE 802.3 compliant.
It uses an advanced 4th generation, high-performance, low power gigabit ethernet chipset from National Semiconductor including
a new ultra low power gigabit transceiver. It provides an onboard intelligent DMA engine and supports wire-speed bus-master DMA operations utilizing maximum PCI bandwidth. Its 64-bit PMC card design makes it a drop-in interface in both CompactPCI and embedded mezzanine controller environments.
The GigMAC PMC Model 5161 is an ideal solution for today's converged, bandwidth intensive, multi-protocol networks.
Applications include switches, edge routers, media gateways, broadcast transmission, digital video and audio, streaming media, internet voice,
network security and monitoring, storage area networks and digital imaging products.
This product is available with an OEM Developer Kit containing VxWorks (5.4/5.5), Linux (2.4/2.6) and Windows (2000, XP) device drivers, sample code, utilities, release notes, user manuals, integration guide and datasheets.
|
Features
- High performance wire speed, 242 Mbytes/sec (1.94 Gb) sustained raw throughput over 64/66 PCI
- 118 Mbytes/sec (944 Mb) sustained raw throughput using 32/33 PCI
- Up to 1,000,000 frames per second maximum transfer rate
- IEEE 1386 64-Bit Compact PCI PMC Mezzanine Card
- VxWorks (5.4/5.5), Linux (2.4/2.6) and Windows (2000, XP) embedded driver support available
- Tested in both CompactPCI and embedded controller environments
- Supports 10/100/1000 auto negotiation
- Fully compliant to IEEE 802.3 and 803.ab copper specifications
- Low power: 3.39W @ 3.3V
- 6 LEDS - 10, 100, 1000, Transmit, Receive and Duplex
- Integrated single-chip magnetics
- Fully shielded, recessed CAT5 RJ-45 connector and aluminum front panel
- Utilizes existing CAT5 and CAT5e cabling for increased investment protection
- PCI Rev 2.2 Compliant
- 64-bit, 66 MHZ PCI bus master operation, also supports 32/33
- National DP83820 media access controller
- National DP83865 transceiver
- Highly integrated, low chip count
- Supports big or little endian
- Uses J11, J12 and J13 PMC Connectors
- Extended status and statistics
- Drop-in modular solution
- FCC compliant
- Available with OEM Developer Kit
|
|
|
At the RTECC Show in Washington DC, DSS Networks Announced a New Family of 3U Compact PCI Network Cards to Address New Market Demands.
DSS Networks Today Announced a New Reduced Cost 12-Port PICMG 2.16 Compliant Gigabit Ethernet Backplane Switch Fabric Card Targeted at High Volume OEMS.
DSS Networks today announced the innovative evolution of it's Model 6468 as an intelligent quad port Gigabit Ethernet server adapter with an onboard level 2 switch providing an independent bypass feature.
DSS Networks today announced a dual port Gigabit Ethernet PMC with SC-type transceivers supporting multiple fiber transceiver wavelength options and ruggedized features for MIL-AERO.
DSS Networks Today Announced a Next-Gen RoHS Compliant PCI-X Based Quad Port Gigabit Ethernet PMC for Telecom, Mil-Aero and Industrial Apps.
DSS Networks Today Announced Entry into the ATCA, MicroTCA and AdvancedMC Product Market with a New Family of AdvancedMC Cards.
DSS Networks today announced another highly differentiated extreme performance Network Product -- a new dual port Gigabit Ethernet PMC Controller with pluggable SFP transceivers supporting both fiber and copper.
DSS Networks today announced another highly differentiated extreme performance Network Product -- a multi-port Processor PMC Gigabit Ethernet Network Processor Engine.
DSS Networks today announced first to market extreme performance PCI-Express Switch/Interface product.
DSS and Wind River are teaming up together to bring you advanced embedded broadband networking solutions.
DSS Networks is a member of the PICMG association
|
