|
 |
DSS Networks Announces Fourth Generation Dual Port Gigabit Ethernet PCI-X Controller For Embedded Systems Applications.
Irvine, CA - July 29, 2002 -- DSS Networks announces yet another new addition to their expanding family of Gigabit Ethernet products
targeted for Embedded Broadband Network Applications.
GigMAC PCI-X Dual Port - Model 6162. This new board offers two ports of 10/100/1000 Base T Gigabit Ethernet over Copper and is fully
IEEE 802.3ab compliant. It is packaged in a 64-bit low profile PCI-X card measuring 2.5 by 6.6 inches and is suitable for embedded enclosures.
Industry standard high throughput PCI-X bus mode is supported up to 133 MHZ and is also backwards compatible with standard 32 or 64 bit PCI.
Dual onboard fully shielded RJ-45 connectors provide direction connection to CAT5 twisted pair cabling.
It is a highly integrated solution utilizing a fourth generation, ultra low power dual port integrated MAC-PHY PCI-X controller.
Power consumption is low utilizing about 2.6W total board power over both ports in Gigabit mode.
This product offers excellent performance and value with simultaneous dual-port capability on a single low-profile PCI-X card and includes optional
support for link failover and aggregation features. It is targeted for use in Data and Telecommunications products including Switches, Edge Routers,
Gateways, Servers and Internet Appliances. The controller board is well suited for support of embedded Broadband applications including Internet Voice,
Digital Video, IP security and Network Attached Storage. This product is now available and comes complete with a Software Development Kit including Linux
and VxWorks drivers.
|
ABOUT DSS NETWORKS:
DSS Networks, Inc. is a privately held revenue sustained corporation located in Lake Forest, CA and designs and manufactures embedded high-performance next generation Broadband Networking products based on technologies including Gigabit Ethernet, 10-Gigabit Ethernet and WDM (CWDM/DWDM) -- for architectures based on open standards including IEEE 1386 PMC/PMC-X, PCI/PCI-X, PCI-Express (PCIe), CompactPCI, PICMG 2.16 PSB, PICMG 3.0 ATCA, AdvancedMC (AMC) and MicroTCA (uTCA).
For more information, visit their website at
http://www.dssnetworks.com or send an e-mail to
sales@dssnetworks.com
###
|
|
|
At the RTECC Show in Washington DC, DSS Networks Announced a New Family of 3U Compact PCI Network Cards to Address New Market Demands.
DSS Networks Today Announced a New Reduced Cost 12-Port PICMG 2.16 Compliant Gigabit Ethernet Backplane Switch Fabric Card Targeted at High Volume OEMS.
DSS Networks today announced the innovative evolution of it's Model 6468 as an intelligent quad port Gigabit Ethernet server adapter with an onboard level 2 switch providing an independent bypass feature.
DSS Networks today announced a dual port Gigabit Ethernet PMC with SC-type transceivers supporting multiple fiber transceiver wavelength options and ruggedized features for MIL-AERO.
DSS Networks Today Announced a Next-Gen RoHS Compliant PCI-X Based Quad Port Gigabit Ethernet PMC for Telecom, Mil-Aero and Industrial Apps.
DSS Networks Today Announced Entry into the ATCA, MicroTCA and AdvancedMC Product Market with a New Family of AdvancedMC Cards.
DSS Networks today announced another highly differentiated extreme performance Network Product -- a new dual port Gigabit Ethernet PMC Controller with pluggable SFP transceivers supporting both fiber and copper.
DSS Networks today announced another highly differentiated extreme performance Network Product -- a multi-port Processor PMC Gigabit Ethernet Network Processor Engine.
DSS Networks today announced first to market extreme performance PCI-Express Switch/Interface product.
DSS and Wind River are teaming up together to bring you advanced embedded broadband networking solutions.
DSS Networks is a member of the PICMG association
|
